Fiche du document
- doi: 10.1093/annhyg/mev074
- issn: 0003-4878
Ce document est lié à :
info:eu-repo/semantics/altIdentifier/doi/10.1093/annhyg/mev074
Ce document est lié à :
info:eu-repo/semantics/altIdentifier/pmid/26464505
Ce document est lié à :
info:eu-repo/semantics/altIdentifier/eissn/1475-3162
Ce document est lié à :
info:eu-repo/semantics/altIdentifier/urn/urn:nbn:ch:serval-BIB_9DD5792CFADD3
info:eu-repo/semantics/openAccess , Copying allowed only for non-profit organizations , https://serval.unil.ch/disclaimer
Sujets proches
Fumes, Welding Wolframium Wolfram Size of particlesCiter ce document
Halshka Graczyk et al., « Characterization of Tungsten Inert Gas (TIG) Welding Fume Generated by Apprentice Welders. », Serveur académique Lausannois, ID : 10.1093/annhyg/mev074
Métriques
Partage / Export
Résumé
Tungsten inert gas welding (TIG) represents one of the most widely used metal joining processes in industry. Its propensity to generate a greater portion of welding fume particles at the nanoscale poses a potential occupational health hazard for workers. However, current literature lacks comprehensive characterization of TIG welding fume particles. Even less is known about welding fumes generated by welding apprentices with little experience in welding. We characterized TIG welding fume generated by apprentice welders (N = 20) in a ventilated exposure cabin. Exposure assessment was conducted for each apprentice welder at the breathing zone (BZ) inside of the welding helmet and at a near-field (NF) location, 60cm away from the welding task. We characterized particulate matter (PM4), particle number concentration and particle size, particle morphology, chemical composition, reactive oxygen species (ROS) production potential, and gaseous components. The mean particle number concentration at the BZ was 1.69E+06 particles cm(-3), with a mean geometric mean diameter of 45nm. On average across all subjects, 92% of the particle counts at the BZ were below 100nm. We observed elevated concentrations of tungsten, which was most likely due to electrode consumption. Mean ROS production potential of TIG welding fumes at the BZ exceeded average concentrations previously found in traffic-polluted air. Furthermore, ROS production potential was significantly higher for apprentices that burned their metal during their welding task. We recommend that future exposure assessments take into consideration welding performance as a potential exposure modifier for apprentice welders or welders with minimal training.