Fiche du document
6 mai 2016
- handle: 10670/1.7fnvkd
- halshs: halshs-01340509
- doi: 10.3390/rs8050387
Ce document est lié à :
info:eu-repo/semantics/altIdentifier/doi/10.3390/rs8050387
info:eu-repo/semantics/OpenAccess
Sujets proches
Battles, sieges, etc Campaigns and battles Photographic measurements StereophotogrammetryCiter ce document
Nathalie Long et al., « Monitoring the Topography of a Dynamic Tidal Inlet Using UAV Imagery », HAL-SHS : géographie, ID : 10.3390/rs8050387
Métriques
Partage / Export
Résumé
Unmanned Aerial Vehicles (UAVs) are being increasingly used to monitor topographic changes in coastal areas. Compared to Light Detection And Ranging (LiDAR) data or Terrestrial Laser Scanning data, this solution is low-cost and easy to use, while allowing the production of a Digital Surface Model (DSM) with a similar accuracy. Three campaigns were carried out within a three-month period at a lagoon-inlet system (Bonne-Anse Bay, La Palmyre, France), with a flying wing (eBee) combined with a digital camera. Ground Control Points (GCPs), surveyed by the Global Navigation Satellite System (GNSS) and post-processed by differential correction, allowed georeferencing DSMs. Using a photogrammetry process (Structure From Motion algorithm), DSMs and orthomosaics were produced. The DSM accuracy was assessed against the ellipsoidal height of a GNSS profile and Independent Control Points (ICPs) and the root mean square discrepancies were about 10 and 17 cm, respectively. Compared to traditional topographic surveys, this solution allows the accurate representation of bedforms with a wavelength of the order of 1 m and a height of 0.1 m. Finally, changes identified between both main campaigns revealed erosion/accretion areas and the progradation of a sandspit. These results open new perspectives to validate detailed morphological predictions or to parameterize bottom friction in coastal numerical models.