Fiche du document
1 avril 2020
- handle: 10670/1.94yder
Ce document est lié à :
10.7764/rdlc.19.1.90-102
info:eu-repo/semantics/openAccess
Mots-clés
Optimal design straight haunches minimum cost rectangular cross-section beams uniformly distributed load concentrated loadSujets proches
BeamsCiter ce document
Arnulfo Luévanos-Rojas et al., « Optimal design of reinforced concrete beams for rectangular sections with straight haunches », Revista de la Construcción, ID : 10670/1.94yder
Métriques
Partage / Export
Résumé
Objective of this research is to present a mathematical model for optimal design of rectangular cross-section beams with straight haunches under the criterion of minimum cost considering the concrete cost and reinforcing steel cost, and taking into account the equations of the regulation (ACI 318S-14). This model presents the equations for a uniformly distributed load and a concentrated load located anywhere on the beam. Two examples are developed by the proposed model, one for uniformly distributed load and another for concentrated load showing the best solution for each case. The results show the following: a) The prismatic beams for uniformly distributed load have a total cost of the 8% greater, a total volume and a total weight of the 9% greater with respect to the non-prismatic beams; b) The prismatic beams for concentrated load have a total cost, a total volume and a total weight of the 6% greater with respect to the non-prismatic beams. The main conclusions are: For a smaller b width the optimal design for both models is presented. The non-prismatic beams are more economical, also these have less volume and less weight with respect to prismatic beams.