Πρόταση δημιουργίας πρωτοκόλλου κοκκομετρικής ανάλυσης με τη μέθοδο του σιφωνίου (πιπέτας) με υποδε- καπλάσιο χρόνο ανάλυσης A protocol for rarid grain size analysis by electronic pippet. A new approach El En

Fiche du document

Date

1 février 2011

Discipline
Type de document
Périmètre
Langue
Identifiant
Source

eJournals

Relations

Ce document est lié à :
https://ejournals.epublishing.ekt.gr/index.php/geo [...]

Organisation

EKT ePublishing

Licences

Copyright (c) 2017 Κωνσταντίνος Αλμπανάκης , https://creativecommons.org/licenses/by-nc/4.0




Citer ce document

Κωνσταντίνος Αλμπανάκης, « Πρόταση δημιουργίας πρωτοκόλλου κοκκομετρικής ανάλυσης με τη μέθοδο του σιφωνίου (πιπέτας) με υποδε- καπλάσιο χρόνο ανάλυσης », eJournals, ID : 10670/1.swx9jb


Métriques


Partage / Export

Résumé El En

Η ανάγκη για κοκκομετρική ανάλυση δειγμάτων μικρής ποσότητας, έδωσε την αφορμή για την πρόταση δημιουργίας ενός πρωτοκόλλου κοκκομετρικής ανάλυσης βασιζόμενη στην ανάλυση σι- φωνίου (πιπέτας), με εφαρμογή του νόμου του Stokes και των εξισώσεων του Folk, αλλά προσαρ- μοσμένου σε σύγχρονα μέσα (ηλεκτρονικά σιφώνια ακρίβειας +/- 4 μl) και ζυγούς διακριτικότητας 10-4 g. Με το προτεινόμενο πρωτόκολλο, μια ανάλυση διαρκεί περίπου 45 λεπτά, αντί για 10 ώρες. Στην εργασία περιγράφονται τα όργανα που έχουν χρησιμοποιηθεί, με τις αναγκαίες τροποποιήσεις τους, το λογισμικό και η διαδικασία ανάλυσης

In this article, the author suggests the creation of a protocol for grain size distribution analysis by pipette method, using specialized software and hardware for minimizing the time needed for analysis. The suggested protocol needs less than 45 minutes for analyzing the size distribution 4Φ to 8Φ sizes since it uses short setting distances, in relation to small pipetting volume, with increased volumetric accuracy and weighting. An Eppendorf Multipette® Stream, electronic pipette, was used with syringe type tips of 2.5 ml. The tip of this electronic pipette was modified and extended, to create a usable length of 6 cm. Small cylindrical setting tubes, 170 ml, were constructed from transparent Plexiglas, with a special cap on the top, to help smooth insertion of the pipette tip. The electronic pipette was programmed to disperse exactly 2000 μl out of 2500 μl of the total tip. Each 2000 μl pipetting had and accuracy in the order of +/- 4 μl. The samples were placed into small metallic containers and placed on top of heating plates with temperature of 65ο C, for drying. The small volume of the samples accelerates further the whole process. The weighting was performed by an electronic balance with a resolution of 0.1 μl. Using Folk (1980) equation, for setting time calculation and tables for temperature dependence of the setting time, the author created an equation that approximates the settling time for each grain size with temperature. The equation is:

document thumbnail

Par les mêmes auteurs

Sur les mêmes sujets

Sur les mêmes disciplines

Exporter en